Вертикальный обрабатывающий центр OKUMA MCR-A5CII 35

Serial Number: 183567 
MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller
Travel:

• X-axis: 6.700 mm
• Y-axis: 4.100 mm
• Z-axis: 800 mm
• W-axis: 1.200 mm
• Table to spindle nose: 0 to 1800 mm

Table Dimensions:

• Working Surface: 3000x6500 mm
• Maximum Load capacity: 37.000 kg
• T-Slots (width x Nº): 24 H7 x 15
• Height from Machine Bottom: 950 mm

Spindle

• Speed range: 30 to 4.000 min-1
• Taper bore: 7/24 Nº 50
• Bearing dia meter: Ø 100

Kit 5C Specifications

• • Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing)
  • Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1)
  • 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) *There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW)
  • BC attachment 1º 6000 rpm
  • Thrugh-spindle-coolant system for machine, 2MPa high/low pressure switchable, incl. spindle through air blower during spindle rotation

Feedrates

• Rapid Travers: X: 30, Y:30; Z:20 m/min
• Feedrate: 1-10.000 mm/min
• Crossrail Traverse: 3 m/min

Automatic tool Changer:

• Tool Shank: MAS BT50
• Tool magazine capacity: 50
• Max. Tool diameter: Ø 135
• Max. Tool length: 400 mm
• Max. Tool weight: 25kg

Motor:

• Spindle drive:  VAC26/22

Power Sources

• Electric power supply: 60KVA
• Compressed air supply: 650 l/min
• Oil mist supplier, from eyeball nozzle
• Oil skimmer
• Special Coolant pump 1.1kW
• RAM oil pan oil collect device

BIG Plus arrangement for each attachment Machine installation below floor level (Wiring arrangement below ground level) up to 1,000mm Chip conveyor, floor type, Lift-up 2 pcs along total bed length, Front side chip disposal Cross rail shower coolant Work washing gun Full enclosure shielding (without the ceiling) 35x65,CE Slope machining function MCR-A5CII.   Показать перевод