Ексцентър преса SCHULER PDR 100/315

Ексцентър преса SCHULER PDR 100/315
Топ артикул
партида номер 8
Време на закриване: 05-14-24 14:06
6,000 € Стартова оферта
3 разглеждащи
Влез, за да наддаваш
Използвайте агент за наддаване
плюс такса за търга и ДДС
Ексцентър преса SCHULER PDR 100/315
05-14-24 14:06
Време на закриване
6,000 €
Стартова оферта
Име
Ексцентър преса SCHULER PDR 100/315
Артикулен номер
914182
Производител
SCHULER
Модел / Вид
PDR 100/315
Дата на производство
неизвестна
Артикулът е достъпен от
immediately
Състояние на артикула
Място
Германия, 35398 Gießen
Такса за търга
18 %
Цени за демонтаж и товарене (обвързващи)
1,000.00 €
Обща цена
плюс ДДС
Разходи по транспорта
не са включени
Условия за доставка
FCA Gießen, натоварен на камион
Условия на плащане
100% плащане преди вземане
Приблизително тегло
7,500 кг
скала центриране прибл. (l x w x h)
1,900 x 1,450 x 3,000 мм
  • Stroke rate: 30-80
  • Plunger overtravel max.: 105
  • Plunger overtravel time max. 0.22 at plunger stroke: 160
  • incl. circuit diagram, overhaul documentation, lubrication instructions, PLC printout
  • Press ready for immediate use
  • UVV until 04/2024
  • New clutch
  • New brakes
  • Operating hours: 171 hours
Operating modes:
  • 1- Set-up
  • 2- Single stroke two-handed
  • 3- Single stroke foot
  • 4- Automated single stroke
  • 5- Endurance run
Press was electrically overhauled and converted to Pilz SPS and Frei DSK 137-110. The clutch and brake were overhauled in mid-2021. The following overhaul work was carried out
  • Dismantle, clean and inspect the tappet and compensating cylinder
  • Connecting rod concentricity and crack checked OK.
  • New piston rod and barrel bushing for balance cylinder manufactured according to sample
  • 2 new groove rings and O-ring
  • Fit compensating cylinder and check function
  • Touch up and scrape connecting rod journals
  • Manufacture new clamping piece
  • Fracture protection was installed incorrectly
  • Align parts, new breaker plate
  • Bolt for lubrication
  • Ball socket missing, remake pin
  • Fit and retune tappet
  • 2 new spherical roller bearings for countershaft
  • Polish shaft
  • Replace 2 pressure reducers 1/2 inch and pressure hoses
  • New flat belt
  • Repair bolts for ratchet
  • Reseal rotor 
The overhaul costs amounted to over 11,000 euros net Покажи превода
Автоматичен превод
Име на търг
Machines and Accessories for Metal Processing
партида номер
8
Документи
Условия на специален търг
Инспекция
Toчното местоположение се дава по заявка.
No fixed date. The items are in different locations (see item description).

Viewing by appointment only! Please contact us in advance at lqu@surplex.com for an inspection appointment.
Дата за товарене
Понеделник, 05-20-2024 до
Петък, 05-24-2024, от 08:00 часa до 16:00 часa
Имате ли някакви въпроси, свързани с артикула? Моля, свържете се с нас.
Нашите услуги
  • Персонално обслужване на 16 езика
  • Консултации на място и от експерти
  • Организация на транспорта при необходимост
  • Помощ при документацията и митническото оформяне