Пробивна машина за дълбоки дупки HONG JI CNC ST-1500

Deep Hole Drilling Machine HONG JI CNC ST-1500
no. 6G150T1
3.753 hours according to the counter
With FANUC SERIES 0i-MF Control 

• ST-1500 is suitable for drilling coolant holes & inject pin holes on molds, tube holes of heat-exchangers, long mechanical sleeves and long aerospace parts.
• High-precision linear guide ways are on all axis with C3 type of ballscrews and servo motors, movement of all axis is nimble and repeat-position is accurate.
• Use P4 type of bearings in drilling spindle, there is a good performance in high speed. The max. spindle speed is 6000rpm.
• Dimension of worktable is 1300x1800mm and the max. loading weight on the worktable is 10tons.

Drilling capacity
Spindle number: 1 spindle
Drilling capacity: Ø3 to Ø25 mm
Drilling length: 1500 mm

Working table stroke
Table size: 1300x1800 mm
Spindle head travel (Z axis): 1650 mm
Spindle vertical travel (Y axis): 1000 mm
Table travel (X axis): 1600 mm
Max. loading weight on worktable: 10000kg

Drive motor
Spindle motor: 5.5kw
Z axis servo motor: 1.2kw
Y axis servo motor: 2.5kw
X axis servo motor: 2.5kw
Chip conveyor: 0.2kw
High-pressure pump: 3.5kw
Lubrication pump: 51w
Voltage/HZ: 380V/50HZ
Total machine power:40.6kva/125A

Speed
Spindle feed: 10-150 mm/min
Spindle RPM: 6000 rpm

High-pressure pump
Pressure: 10-100 kg/cm2
Flow: 30-100 L/min
Tank capacity: 1500 L

Standard accessories

• Paper filter
• Magnetic filter
• Chip conveyor
• High pressure oil pump
• Auto lubrication system
• Outer oil tank/Oil level gauge
• Transformer
• Leveling screws & block
• Mechanical / Electrical operation manual

Special accessories

• Gun drill (Ø6,8,10)
• Drill bushing (Ø6,8,10)
• Whip guide bushes (Ø6,8,10)
• Machine guard