SEW-EURODRIVE Drugi inventar za radionicu

SEW-EURODRIVE Drugi inventar za radionicu
Savjet
Lot br. 9
Zatvaranje aukcije: 25.04.24 11:08
800 € Početna cijena
4 promatrača
Prijavite se za sudjelovanje u dražbi
Upotrijebi nadmetača
Provizija i PDV
SEW-EURODRIVE Drugi inventar za radionicu
25.04.24 11:08
Zatvaranje aukcije
800 €
Početna cijena
Naziv
SEW-EURODRIVE Drugi inventar za radionicu
Broj artikla
894038
Proizvođač
SEW EURODRIVE
Tip
nepoznato
Godina proizvodnje
nepoznato
Artikl dostupan od
immediately
Stanje artikla
Lokacija
Češka, 435 01 Havraň
provizije
18 %
Troškovi demontiranja i ukrcaja (obvezujuće)
100,00 €
Ukupna cijena
plus PDV
Troškovi prijevoza
nisu uključeni
Uvjeti dostave
FCA Havraň, ukrcano na kamion
Uvjeti plaćanja
100% plaćanje prije preuzimanja
Porez / Kaucija
U slučaju prekogranične isporuke, iznos dospjelog poreza početno se zadržava kao depozit prikazan na računu.
približno određivanje mjere (d x š x v)(
800 x 1.600 x 2.000 mm
Približna masa
250 kg
The POLY dosing pump unit (EPP) consists of several functional parts. The base
is a welded supporting frame which the individual parts are attached to. EPP
supplies material for spraying at the defined pressure and temperature according
to the input parameters of the recipe.
Low-pressure polyol supply line (with the pressure of 2 - 8 bar) is connected to
EPP input. It leads to Mann & Hummel (A06) filter. Material is fed via
BARMAG high-pressure gear pump (P01) via manifold (A04) fitted with
manometers (PI01, PI02), pressure transducers (PR01, PR02) and HAWE safety
valve (V11). This pump is driven by SEW motor (MOT 01) via SYNTEX35-
ROTEX GS 38/45 (C01) clutch. The material then flows (at the pressure of 40 -
100 bar) through a flow-meter (QR01), heat exchanger (HE03), high-pressure
filter (A07) and checkpoint. Material pressure (PR03) and temperature (TE02)
are monitored here. Material then continues via stream distributor to the head
and then returns to EPP via the stream distributor.
Another checkpoint is on EPP return line. It monitors the material temperature
(TE03). This is followed by three pneumatic valves VSCDN4 (V30, V31, V32)
and pressure adjustment valve (V21) that sets the pressure value during HPR.
Valve V31 is closed in normal operation. It opens only during flow calibration
while valve V32 closes. V32 is closed also during spraying.
When valve V30 closes, material flows to high-pressure circulation based on
setting of the reducing valve V21.
EPP is in continuous operation (during operation of the entire line), because
material must keep circulating. Prikaži prijevod
Automatski prijevod
Naziv aukcije
Completion of Car Dashboard Production
Lot br.
9
Dokumenti
Uvjeti i pravila ove aukcije
Provjera stanja
Točna lokacija artikala na upit.
435 01 Havraň, Czech Republic

- address on request -
Viewing by prior appointment only!
Imate li bilo kakvih pitanja u vezi artikla? Molimo da naš kontaktirate.
Gabriela Angelova (Manager Customer Care)
Gabriela Angelova & tim
Služba za korisnike
Naše usluge
  • Osobna usluga na 16 jezika
  • Savjetovanje na lokaciji putem stručnjaka
  • Organizacija prijevoza po potrebi
  • Podrška s papirologijom i carinjenjem