Profilna brusilka DELLE VEDOVE LBD 15+15

- Edge profiling, sanding and painting system
- Serial number 03083
- Total installed power 117 KW
- Working width from 200 mm up to 2500 mm
- Workpiece thickness from 6 mm up to 80 mm
- Minimum workpiece length 90 mm
- Adjustable feed speed from 5 m/min up to 44 m/min
- Power of the feed motors: 7.50 KW and 0.75 KW
- Power of the machine opening motor 1.50 KW
- Machine equipped identically on both sides with 9 units on each side:
- 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm
- 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm
- 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45°
- 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad
- 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad
- 6 - Belt sanding unit for lower bevel: Motor 1.10 KW-930 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad
- 7 - MOD EC UV lacquering unit with vacuum
- 8 - MOD UC UV drying group
- 9 - Belt sanding unit: 2.20 KW-940 rpm motor, tiltable, height and depth adjustable, with pneumatic sanding pad
- Separate electrical control cabinet
- OMRON NS-10 control unit
- Several dismantled groups previously belonging to this line are supplied: 2 belt sanding groups for upper bevel, 2 belt sanding groups for lower bevel, 2 sanding groups with sanding disc, 2 gilding groups Prikaz prevoda