HAAS VF-4DHE CNC Vertikalni obdelovalni center

ATTENTION: Tools and tool holders not included
serial number 32429s

• travel 
  • X Axis 1270 mm
  • Y Axis 508 mm
  • Z Axis 635 mm
• spindle nose to table (~ max) 742 mm
• spindle nose to table  (~ min) 107 mm
• spinled max. rating 22.4 kW
• max. speed 8100 rpm
• max. torque 122.0 Nm @ 2000 rpm
• taper CT40 | BT40 | HSK-A63
• bearing lubrication Air / Oil Injection
• table 
  • length 1321 mm
  • width 495 mm
• T-Slot width 15.90 mm to 16.00 mm
• T-Slot center distance 80 mm
• number of Std T-Slots - 5
• max. weight on table (evenly distributed) 1588 kg
• feed rates max. cutting 650 ipm 16.5 m/min
• rapids on 
  • X 25.4 m/min
  • Y 25.4 m/min
  • Z 25.4 m/min
• axis motors max. thrust 
  • X 11343 N
  • Y 11343 N
  • Z 18683 N
• tool changer type carousel - capacity 20
• max. tool diameter (full) 89 mm
• max. tool weight 5.4 kg
• coolant capacity 208 L
• air required 6.9 bar
• air pressure min. 5.5 bar
• spindle speed 8100 rpm
• spindle power 22.4 kW
• full load amps (3 Phase) - Low 70 A
• input AC voltage (3 Phase) - 360 - 440 VAC, 3 phase, 50/60 Hz
• full load Amps 20 A / largest load 35 A