SEW-EURODRIVE Druga delavniška oprema

SEW-EURODRIVE Druga delavniška oprema
Nasvet
serijska št. 9
Čas zaključka: 25.04.24 11:08
800 € Izklicna cena
5 opazovalcev
Za oddajo ponudbe se prijavite
Nastavitev dražbenega agenta
+ dražbena provizija in DDV
SEW-EURODRIVE Druga delavniška oprema
25.04.24 11:08
Čas zaključka
800 €
Izklicna cena
Ime
SEW-EURODRIVE Druga delavniška oprema
Številka izdelka
894038
Proizvajalec
SEW EURODRIVE
Model / Vrsta
ni znano
Leto izdelave
ni znano
Izdelek na voljo od
immediately
Kakovost izdelka
Lokacija
Češka republika, 435 01 Havraň
provizija dražbe
18 %
Cena demontiranja in nalaganja (binding)
100.00 €
Končna cena
plus DDV
Cena prevoza
ne vsebuje
Pogoji dostave
FCA Havraň, naloženo na dostavno vozilo
Pogoji plačila
100% plačilo pred prevzemom
davek/polog
V primeru čezmejne dostave se znesek dolgovanega davka najprej zadrži prek pologa, prikazanega na računu.
približne mere postavitve (d x š x v)
800 x 1,600 x 2,000 mm
Približna teža
250 kg
The POLY dosing pump unit (EPP) consists of several functional parts. The base
is a welded supporting frame which the individual parts are attached to. EPP
supplies material for spraying at the defined pressure and temperature according
to the input parameters of the recipe.
Low-pressure polyol supply line (with the pressure of 2 - 8 bar) is connected to
EPP input. It leads to Mann & Hummel (A06) filter. Material is fed via
BARMAG high-pressure gear pump (P01) via manifold (A04) fitted with
manometers (PI01, PI02), pressure transducers (PR01, PR02) and HAWE safety
valve (V11). This pump is driven by SEW motor (MOT 01) via SYNTEX35-
ROTEX GS 38/45 (C01) clutch. The material then flows (at the pressure of 40 -
100 bar) through a flow-meter (QR01), heat exchanger (HE03), high-pressure
filter (A07) and checkpoint. Material pressure (PR03) and temperature (TE02)
are monitored here. Material then continues via stream distributor to the head
and then returns to EPP via the stream distributor.
Another checkpoint is on EPP return line. It monitors the material temperature
(TE03). This is followed by three pneumatic valves VSCDN4 (V30, V31, V32)
and pressure adjustment valve (V21) that sets the pressure value during HPR.
Valve V31 is closed in normal operation. It opens only during flow calibration
while valve V32 closes. V32 is closed also during spraying.
When valve V30 closes, material flows to high-pressure circulation based on
setting of the reducing valve V21.
EPP is in continuous operation (during operation of the entire line), because
material must keep circulating. Prikaz prevoda
Samodejni prevod
Ime dražbe
Completion of Car Dashboard Production
serijska št.
9
Dokumenti
Posebni pogoji dražbe
Pregled
Točen naslov vam sporočimo glede na zanimanje.
435 01 Havraň, Czech Republic

- address on request -
Viewing by prior appointment only!
Ali imate kakršno koli vprašanje v zvezi z izdelkom? Obrnite se na nas.
Gabriela Angelova (Manager Customer Care)
Gabriela Angelova in ekipa
Storitve za stranke
Naše storitve
  • Osebne storitve v 16 jezikih
  • Svetovanje na lokaciji in s strani strokovnjakov
  • Po potrebi organizacija prevoza
  • Pomoč pri urejanju papirjev in carine