BRANDT KDF660 Edge Bander with PU glue (and hot melt glue)

BRANDT KDF 660 Profiline with joint cutter and corner rounder
PU glue (and hot melt glue)
Workpiece preheating: IR preheating
Edge material: 0.4 - 15.0 mm
Max. width of edgebanding: max. 66 mm (at 1 mm band thickness)
Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm
Workpiece thickness: Max. 8-60 mm
Control: PC20+ Streckensteuerung with modem for teleservice
1. Joint milling
2. Chopping knife
3a. Pre-activation with IR heating
3b. Anti adhesive spray device
3c. Pre-melter, for quick change of adhesive
3d. Glue aggregate with glue application roller in follow-on or counterflow
3e. Program-controlled pressure zone
4. Capsaws - adjustable 0° - 15°
5a. Coarse milling (Bündig milling) -radial
Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness
5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or radius
6. Corner rounding aggregates - 2 motorized with automatic thickness adjustment
7a. Profile scrapers for flat, radius or phase scraping, equipped with quick-change heads
7b. Flat scrapers for perfect surface finish down to 0.3 mm
8a. Detergent spraying device
8b. Dense brushes
Glue output in travel or counterflow
Throughput: 8-18 m/min
Connection: 24 kW/400V/50Hz
Tool: Radius
Extraction: 120 + (2x) 100 mm
Suction capacity: 3,000 m³/h
Air consumption: approx.350 L/Min
Compressed air: 6 Bar
Joint cutters: (2x) 2.2 kW, 200 Hz, FG 3500, clearance: 48 mm, Diameter: 42 mm
Chop saws: (2x) 0.35 kW, 200 Hz, 12,000 rpm
Coarse milling/pre-milling/radial milling: B/O (2x) 0.55kW, 200 Hz, 12,000 rpm
Fine milling/radial milling: B/O (2x) 0.55 kW, 200 Hz, 12,000 rpm, Program controlled
Copy cutters: (2x) 0.35 kW, 200 Hz, 11,000 rpm
Polishing aggregates: (2x) 0.18 kW, 50 Hz, 150x20 mm Çeviriyi göster