1 / 10
ABUS - 1/4FN-3 - Electric Chain Hoist 250kg with Control Cylinder
- Puja actual
- Estado
€
Importe total de la puja máxima
Ver desglose total
Importe total de la puja máxima
Ver desglose total
€
Importe de la puja
Ver desglose total
Importe de la puja
Ver desglose total
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- ABUS
- Tipo
- 1/4FN-3
- Año de construcción
- 1986
- Número de serie
- 3L9274735-1
- Capacidad .
- 250kg
- Altura de elevación
- 3m
- Mando a distancia
- Sí
- Conexión eléctrica
- 380V
- Dimensión total L
- 600mm
- Dimensión total W
- 350mm
- Dimensión total H
- 1300mm
- Peso propio
- 60kg
- SA Code
- 84251910
- Condiciones de entrega
- Ex fundación-sin empaquetar
Descripción
For sale is an ABUS electric chain hoist type 1/4FN-3 with a load capacity of 250 kg, permanently mounted on a hand trolley.
The hoist motor is designed
for 7.2 m/min Fine stroke 1.8 m/min
Control is via a 2-button control bottle (up/down)
Connected loads: 220/380 V, 50 Hz, 3 phases
The condition was confirmed on site by a function test via control system – chain runs cleanly, no jamming.
According to the plaque, the UVV test was last carried out by WEWIRA (next test in 2017).
The case has age-appropriate paint wear and scratches, the technology works.
The device is sold as a running carrier, without disassembly.
The hoist motor is designed
for 7.2 m/min Fine stroke 1.8 m/min
Control is via a 2-button control bottle (up/down)
Connected loads: 220/380 V, 50 Hz, 3 phases
The condition was confirmed on site by a function test via control system – chain runs cleanly, no jamming.
According to the plaque, the UVV test was last carried out by WEWIRA (next test in 2017).
The case has age-appropriate paint wear and scratches, the technology works.
The device is sold as a running carrier, without disassembly.
Comentarios
Electric chain hoist with functional up/down control via control bottle, no visible defects on the chain or hook.
Lifting height as indicated 3 m. Housing with clear paint scratches and rust on corners and chassis.
WEWIRA seal of approval (according to BGV D6) expired – UVV re-inspection required.
Still suitable for occasional workshop use or internal lifting.
No technical defects found during on-site test.
Lifting height as indicated 3 m. Housing with clear paint scratches and rust on corners and chassis.
WEWIRA seal of approval (according to BGV D6) expired – UVV re-inspection required.
Still suitable for occasional workshop use or internal lifting.
No technical defects found during on-site test.
Video
Vea los detalles y observe más de cerca el artículo en este video.
