1 / 77
Danobat - 2012 - T3CH126+CPI105DI - Drilling and Sawing Street
- Puja actual
- Estado
€
Importe total de la puja máxima
Ver desglose total
Importe total de la puja máxima
Ver desglose total
€
Importe de la puja
Ver desglose total
Importe de la puja
Ver desglose total
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- Danobat
- Tipo
- T3CH126+CPI105DI
- Año de construcción
- 2012
- Número de serie
- 1011901398
- Número de ejercicios
- 3
- Capacidad de perforación
- 6-40mm
- Número de velocidades
- 0-2100
- Velocidad desde n=
- 0rpm
- Velocidad hasta n=
- 2500rpm
- Control de velocidad continuo
- Sí
- Peso de la máquina
- 13950kg
- Dimensión l
- 5039mm
- Dimensión w
- 1960mm
- Dimensión h
- 3476mm
Descripción
Infeed table 24000 mm.
Discharge table 18000 mm.
Multispindle drilling rig T3CH-126:
Maximum material size 1200 x 600 mm.
Minimum Material Dimension 80 x 6 mm.
Drilling, tapping, sovereigning, centering and marking.
Servo controlled motor speed and feed speeds.
3 changers for 6 tools for 3-sided machining.
Automatic calibration system by means of laser measurement, after tool change.
Clamping pressure control horizontal clamping max. 1 x 2.5 tons.
Clamping pressure control vertical clamping max. 4 x 1.5 tons.
Double column mitre band saw machine CPI-105DI:
Capacity 90 degrees 1000 x 500 mm. or around 520 mm.
45 degrees 660 x 500 mm.
30 degrees 450 x 500 mm.
frequency controlled variable belt speed 20-157 m/min.
Hydraulic feeding and clamping.
driven chip brush.
Horizontal and Vertical clamping.
Trailing saw band guide arm with the clamp.
Bandsaw size 7545 x 54 x 1.6 mm.
Automatic hydraulic tire tensioning device.
Marking system Danomarking UM03 on T3CH-126:
Powered marking system by means of marking tools.
Danomarking installed for 4-sided machining for marking and scribing.
Vertical Danomarking system placed on the Vertical drilling unit.
2 Horizontal Danomarking systems on the Horizontal drilling units.
Lower Danoma ring with control mounted underside.
Operating System:
DANOCONTROL expanded.
PC control with FAGOR axis control.
Interface with DSTV protocol data entry capability.
Real-time edits can be followed on graphic screen.
standard link with Lantek 3D Flex software.
Discharge table 18000 mm.
Multispindle drilling rig T3CH-126:
Maximum material size 1200 x 600 mm.
Minimum Material Dimension 80 x 6 mm.
Drilling, tapping, sovereigning, centering and marking.
Servo controlled motor speed and feed speeds.
3 changers for 6 tools for 3-sided machining.
Automatic calibration system by means of laser measurement, after tool change.
Clamping pressure control horizontal clamping max. 1 x 2.5 tons.
Clamping pressure control vertical clamping max. 4 x 1.5 tons.
Double column mitre band saw machine CPI-105DI:
Capacity 90 degrees 1000 x 500 mm. or around 520 mm.
45 degrees 660 x 500 mm.
30 degrees 450 x 500 mm.
frequency controlled variable belt speed 20-157 m/min.
Hydraulic feeding and clamping.
driven chip brush.
Horizontal and Vertical clamping.
Trailing saw band guide arm with the clamp.
Bandsaw size 7545 x 54 x 1.6 mm.
Automatic hydraulic tire tensioning device.
Marking system Danomarking UM03 on T3CH-126:
Powered marking system by means of marking tools.
Danomarking installed for 4-sided machining for marking and scribing.
Vertical Danomarking system placed on the Vertical drilling unit.
2 Horizontal Danomarking systems on the Horizontal drilling units.
Lower Danoma ring with control mounted underside.
Operating System:
DANOCONTROL expanded.
PC control with FAGOR axis control.
Interface with DSTV protocol data entry capability.
Real-time edits can be followed on graphic screen.
standard link with Lantek 3D Flex software.
Detalles adicionales
La recogida de los bienes adquiridos se realiza de la siguiente manera:
Tras recibir el pago, el vendedor se pondrá en contacto contigo para concertar una cita para recoger. Entonces recibirás la dirección exacta.
La ciudad y provincia donde se encuentran las parcelas se indica junto a la parcela.
La edad mínima para visitar los días de recogida es de 18 años. Los visitantes deben poder identificarse.
No existe derecho de retirada. Consulta los Términos y Condiciones de la Subasta para más información.
No se organizará ningún día de velación para esta subasta.
Por cada lote se cobrará una tasa administrativa de 100 €.
Video
Vea los detalles y observe más de cerca el artículo en este video.
