1 / 55
Haltec Basic Temporary Industrial Hall
- Puja actual
- Estado
€
Importe total de la puja máxima
Ver desglose total
Importe total de la puja máxima
Ver desglose total
€
Importe de la puja
Ver desglose total
Importe de la puja
Ver desglose total
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- Haltec
- Material
- Aluminium
- Tipo
- Basic
- Superficie total
- 437m²
- Altura de la cumbre
- 6500mm
- Altura del canalón
- 4000mm
- Dimensión total L
- 25000mm
- Dimensión total W
- 17500mm
- Dimensión total H
- 6500mm
Descripción
Haltec Basic temporary / demountable industrial hall.
Dimensions:
25 meters length
17.5 meters width
6.5 meters ridge height
4 meters gutter height
Sliding door width: 4.5 meters
Sliding door height: 4 metres
Construction:
Modular system
Aluminium uprights with adjustment option
Foundation-free ground anchoring by means of ground spike
Aluminium roof trusses
Trapezoidal sheet material for walls of 2.40m x 1m per panel
PVC roof tarpaulin with drawstrings + inner tarpaulin (condensation protection class 3) (2.5m width)
Trapezoidal double sliding gate
Tensioners for roof and wall construction
Snow load (roof) 0.20 KN/m2
Wind pressure (thrust) 0.60 KN/m2
Consisting of:
10 modular upright, wall and roof construction at 2.5m depth, 4m gutter height and 6.5m ridge height
2 separate entrance doors
Double sliding gate (4.5m clearance width and 4m headroom)
15 pieces of LED lighting on roof construction (220V)
Rain gutters on both long sides with drainage
Can be used with various types of surfaces (paving, asphalt, etc.)
The length of the hall can be shortened by 2.5 meters due to the modular construction of both wall and roof cladding. The roof consists of a 2.5 meter wide roof tarpaulin + inner tarpaulin which has the same width as the trapezoidal wall panels.
Dimensions:
25 meters length
17.5 meters width
6.5 meters ridge height
4 meters gutter height
Sliding door width: 4.5 meters
Sliding door height: 4 metres
Construction:
Modular system
Aluminium uprights with adjustment option
Foundation-free ground anchoring by means of ground spike
Aluminium roof trusses
Trapezoidal sheet material for walls of 2.40m x 1m per panel
PVC roof tarpaulin with drawstrings + inner tarpaulin (condensation protection class 3) (2.5m width)
Trapezoidal double sliding gate
Tensioners for roof and wall construction
Snow load (roof) 0.20 KN/m2
Wind pressure (thrust) 0.60 KN/m2
Consisting of:
10 modular upright, wall and roof construction at 2.5m depth, 4m gutter height and 6.5m ridge height
2 separate entrance doors
Double sliding gate (4.5m clearance width and 4m headroom)
15 pieces of LED lighting on roof construction (220V)
Rain gutters on both long sides with drainage
Can be used with various types of surfaces (paving, asphalt, etc.)
The length of the hall can be shortened by 2.5 meters due to the modular construction of both wall and roof cladding. The roof consists of a 2.5 meter wide roof tarpaulin + inner tarpaulin which has the same width as the trapezoidal wall panels.
Comentarios
!! PLEASE NOTE: THE TEMPORARY INDUSTRIAL HALL MUST BE DISMANTLED AND DISPOSED OF BY THE BUYER BEFORE 15 MARCH. SITE AND SHED ARE ACCESSIBLE FOR COMPANY CAR / TRUCK WITH TRAILER !!
Detalles adicionales
La recogida de los bienes adquiridos se realiza de la siguiente manera:
Tras recibir el pago, el vendedor se pondrá en contacto contigo para concertar una cita para recoger. Entonces recibirás la dirección exacta.
La ciudad y provincia donde se encuentran las parcelas se indica junto a la parcela.
La edad mínima para visitar los días de recogida es de 18 años. Los visitantes deben poder identificarse.
No existe derecho de retirada. Consulta los Términos y Condiciones de la Subasta para más información.
No se organizará ningún día de velación para esta subasta.
Por cada lote se cobrará una tasa administrativa de 100 €.
Video
Vea los detalles y observe más de cerca el artículo en este video.
