1 / 9
MSM Vacuum press 2021 8300 x 3300mm press area
- Puja actual
- Estado
€
Importe total de la puja máxima
Ver desglose total
Importe total de la puja máxima
Ver desglose total
€
Importe de la puja
Ver desglose total
Importe de la puja
Ver desglose total
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- MSM Maschinebau GmbH
- Tipo
- VMP 8333
- Año de construcción
- 2021
- Peso de la máquina
- 2700kg
- Dimensión l
- 10200mm
- Dimensión w
- 3700mm
- Dimensión h
- 3000mm
- Condiciones de entrega
- Ex fundación-sin empaquetar
Descripción
Table inner dimensions 8300 x 3300mm (press surface)
Table load capacity 500kg (surface load)
Total installation dimensions of the baler 10.2 x 3.7 x 3.0m
Total weight of the press approx. 2700kg
Connected load 9 KW
400 Volt All parts powder-coated
Table RAL 7035
Membrane frame RAL 7011
Pressure differential switch for displaying and adjusting the negative pressure system and pressing pressure
Vacuum press VMP 8333 consisting of: Table base made of welded
Tubular steel construction consisting of 5 bolted lightweight segments with adjustable feet for height adjustment,
Table covering made of 22mm grey on both sides coated MDF board with 8 Suction Holes 19mm,
Slotted board made of 10mm MDF raw with Grid grooves 80x80mm on the underside for air distribution, (protection + wear plate)
Vertically opening membrane frame made of Welded tubular steel construction with Diaphragm quick-change device (quick release for diaphragm clamping), Natural rubber membrane 2mm, 700% Elongation, Color Black,
membrane frame with four screw stroke columns mounted on the short side,
Lifting height maximum 1500mm,
Lifting speed open/close 40/40 Sec.,
Circumferential safety contact strip with Safety relays as crush protection,
4 pieces of NOT STOP switch on the Table corners,
Vacuum supply by oil-lubricated Vacuum pump with 250m³ suction power, Maximum vacuum -0.99 bar Vacuum control with 3-way solenoid valve,
Digital pressure differential switch for Vacuum control,
2 pieces 250 liter vacuum storage tank,
Operation of the vacuum press on the free-standing Control panel,
Main switch for switching on,
NOT STOP switch,
2-hand operation for opening and closing of the membrane frame,
Push button for vacuum and ventilation
Table load capacity 500kg (surface load)
Total installation dimensions of the baler 10.2 x 3.7 x 3.0m
Total weight of the press approx. 2700kg
Connected load 9 KW
400 Volt All parts powder-coated
Table RAL 7035
Membrane frame RAL 7011
Pressure differential switch for displaying and adjusting the negative pressure system and pressing pressure
Vacuum press VMP 8333 consisting of: Table base made of welded
Tubular steel construction consisting of 5 bolted lightweight segments with adjustable feet for height adjustment,
Table covering made of 22mm grey on both sides coated MDF board with 8 Suction Holes 19mm,
Slotted board made of 10mm MDF raw with Grid grooves 80x80mm on the underside for air distribution, (protection + wear plate)
Vertically opening membrane frame made of Welded tubular steel construction with Diaphragm quick-change device (quick release for diaphragm clamping), Natural rubber membrane 2mm, 700% Elongation, Color Black,
membrane frame with four screw stroke columns mounted on the short side,
Lifting height maximum 1500mm,
Lifting speed open/close 40/40 Sec.,
Circumferential safety contact strip with Safety relays as crush protection,
4 pieces of NOT STOP switch on the Table corners,
Vacuum supply by oil-lubricated Vacuum pump with 250m³ suction power, Maximum vacuum -0.99 bar Vacuum control with 3-way solenoid valve,
Digital pressure differential switch for Vacuum control,
2 pieces 250 liter vacuum storage tank,
Operation of the vacuum press on the free-standing Control panel,
Main switch for switching on,
NOT STOP switch,
2-hand operation for opening and closing of the membrane frame,
Push button for vacuum and ventilation
Comentarios
Like new, untested.
Detalles adicionales
Plazo de pago:
en tres días
Recogida:
La cobranza es posible hasta cuatro semanas después del final de la subasta, salvo que se indique lo contrario en el artículo. (Solo con cita previa)
Todos los artículos se venden como usados y sin inspección, salvo que se indique lo contrario.
Por favor, consulta la descripción del artículo.
Para información más detallada sobre garantía y garantía, consulte las condiciones de la subasta.
Nota:
En caso de una recogida tardía, pueden surgir costes adicionales por el desmontaje, carga y descarga, transporte y alquiler de almacenamiento en un almacén externo, que deben asumir el comprador.
Si se requiere un permiso BAFA para exportar, también pueden incurrir en costes adicionales para el almacenamiento, manipulación o desmantelamiento.
Video
Vea los detalles y observe más de cerca el artículo en este video.
