1 / 50
MAZAK - VTC-20 B - Vertical Machining Center - 1999
- Aktualna oferta
- Status
Całkowita kwota oferty
Zobacz całkowite podsumowanie
Całkowita kwota oferty
Zobacz całkowite podsumowanie
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Maksymalna kwota oferty
Zobacz całkowite podsumowanie
Specyfikacja przedmiotu
- Ilość
- 1
- Marża
- Nie
- Marka
- MAZAK
- Typ
- VTC-20 B
- Rok budowy
- 1999
- Waga maszyny
- 6000kg
- Wymiar l
- 4400mm
- Wymiar w
- 2400mm
- Wymiar h
- 2250mm
- Warunki dostawy
- Załadunek na ciężarówkę
Opis
Serial Number: 141643
Control: MAZAK MAZATROL M PLUS
Table dimensions: 1460 x 510 mm
Tool holder: SK 40
X-axis travel: 1120 mm
Y-axis travel: 510 mm
Travel Z-axis: 510 mm
Max. distance from spindle end face to clamping surface: 690 mm
Spindle speed: 40 - 7000 rpm
Max. permissible weight on machine table: 500 kg
Rapid traverse in X and Y axis: 24 m/min
Rapid traverse in Z-axis: 20 m/min
Cutting feed speed X/Y/Z: 1 - 5000 mm/min
Number of tool locations: 24
Max. tool diameter: 80 mm with occupied neighboring space
max. tool diameter with free adjacent space: up to max. 110 mm
Max. tool length: 350 mm
Max. tool weight: 8 kg
incl. chip conveyor MAYFRAN
incl. the tool holders
located on the tool changer
Attention: the machine vice clamped on the table is not included in the scope of delivery!
Internal reference: previously lot 14
Control: MAZAK MAZATROL M PLUS
Table dimensions: 1460 x 510 mm
Tool holder: SK 40
X-axis travel: 1120 mm
Y-axis travel: 510 mm
Travel Z-axis: 510 mm
Max. distance from spindle end face to clamping surface: 690 mm
Spindle speed: 40 - 7000 rpm
Max. permissible weight on machine table: 500 kg
Rapid traverse in X and Y axis: 24 m/min
Rapid traverse in Z-axis: 20 m/min
Cutting feed speed X/Y/Z: 1 - 5000 mm/min
Number of tool locations: 24
Max. tool diameter: 80 mm with occupied neighboring space
max. tool diameter with free adjacent space: up to max. 110 mm
Max. tool length: 350 mm
Max. tool weight: 8 kg
incl. chip conveyor MAYFRAN
incl. the tool holders
located on the tool changer
Attention: the machine vice clamped on the table is not included in the scope of delivery!
Internal reference: previously lot 14
Dodatkowe szczegóły
Odbiór:
22.09.-01.10.2026 (tylko po wcześniejszym umówieniu)
Prosimy pamiętać, że wszystkie przedmioty są sprzedawane używane i nieprzetestowane, chyba że zaznaczono inaczej. Opis artykułu jest zdecydowany.
Aby uzyskać szczegółowe informacje o gwarancji i warunkach gwarancyjnych, zapoznaj się z warunkami aukcji.
Uwaga: Opóźniony lub nieodbiorany odbiór może wiązać się z dodatkowymi kosztami przechowywania, obsługi lub demontażu, które ponosi kupujący.