1 / 15
2010 VERMEER Stump Grinder SC252
- Puja actual
- Estado
€
Importe total de la puja máxima
Ver desglose total
Importe total de la puja máxima
Ver desglose total
€
Importe de la puja
Ver desglose total
Importe de la puja
Ver desglose total
Especificaciones del lote
- Cantidad
- 1
- Margen
- No
- Marca
- Vermeer
- Tipo
- Baumstumpffräse SC252
- Año de construcción
- 2010
- Número de serie
- 1VRN07TFXA1016778
- Velocidad desde n=
- 1300rpm
- Velocidad hasta n=
- 2400rpm
- Manual presente
- Sí
- Peso de la máquina
- 550kg
- Dimensión total W
- 800mm
- Dimensión total H
- 1200mm
- Dimensión total L
- 2500mm
- Peso
- 550
- SA Code
- 84322910
- Condiciones de entrega
- Ex fundación-sin empaquetar
Descripción
Vermeer SC252 Stump Grinder – Year 2010 – Refurbished
General information
Manufacturer: Vermeer
Model No.: SC252
Year of Make: 2010
Machine Type: Stump Grinder
Application: Commercial continuous use
Engine
Engine: Kohler Command PRO ECH749 EFI
Power: 26.5 hp
Engine new and unused
With manufacturer's warranty
Electronic Injection (EFI)
Starts flawlessly, smooth and clean running
Technical condition
Comprehensively overhauled
Technical condition well above usual used machine level
Immediately ready for
use No known malfunctions
Renewed components
V-belts
Complete milling unit
Milling wheels
Knife holder
Milling teeth
Splash protection rubbers
Pulley(s)
Gel Battery
Control lever
Swivel castors
Equipment / Features
Compact design
High manoeuvrability
Powerful milling wheel
Adjustable working height and depth
Suitable
for private properties as well as gardening and landscaping All protective covers fully available
Optical Condition
Chassis with slight, usual signs of
wear No discernible structural damage
Operating lever smooth-running
Tyres in good condition without excessive abrasion
Possible
applications
Tree care companies
Gardening and landscaping
Municipalities
Service companies
General information
Manufacturer: Vermeer
Model No.: SC252
Year of Make: 2010
Machine Type: Stump Grinder
Application: Commercial continuous use
Engine
Engine: Kohler Command PRO ECH749 EFI
Power: 26.5 hp
Engine new and unused
With manufacturer's warranty
Electronic Injection (EFI)
Starts flawlessly, smooth and clean running
Technical condition
Comprehensively overhauled
Technical condition well above usual used machine level
Immediately ready for
use No known malfunctions
Renewed components
V-belts
Complete milling unit
Milling wheels
Knife holder
Milling teeth
Splash protection rubbers
Pulley(s)
Gel Battery
Control lever
Swivel castors
Equipment / Features
Compact design
High manoeuvrability
Powerful milling wheel
Adjustable working height and depth
Suitable
for private properties as well as gardening and landscaping All protective covers fully available
Optical Condition
Chassis with slight, usual signs of
wear No discernible structural damage
Operating lever smooth-running
Tyres in good condition without excessive abrasion
Possible
applications
Tree care companies
Gardening and landscaping
Municipalities
Service companies
Comentarios
The Vermeer SC252 is in very good, technically revised condition. The machine was extensively overhauled and numerous components were replaced. The Kohler Command PRO ECH749 EFI engine (26.5 hp) is new. Engine starts perfectly, runs smoothly and cleanly.
The following components have been replaced: V-belt, milling unit, milling wheels, knife holders, milling teeth, splash protection rubbers, pulleys, gel battery, control lever and swivel castors. As a result, the technical condition is almost the same as that of a newly built machine.
The chassis shows slight, usual signs of wear, but no structural damage. The control lever and control system work smoothly. The tyres are in good condition without excessive abrasion. All protective covers are fully available.
The machine is ready for immediate operation and has no known defects or malfunctions. Due to the extensive renovations, it offers a significantly higher condition than used standard models of this year.
The following components have been replaced: V-belt, milling unit, milling wheels, knife holders, milling teeth, splash protection rubbers, pulleys, gel battery, control lever and swivel castors. As a result, the technical condition is almost the same as that of a newly built machine.
The chassis shows slight, usual signs of wear, but no structural damage. The control lever and control system work smoothly. The tyres are in good condition without excessive abrasion. All protective covers are fully available.
The machine is ready for immediate operation and has no known defects or malfunctions. Due to the extensive renovations, it offers a significantly higher condition than used standard models of this year.
