|Name||MTA Recycling Plasticizer|
|Machine available from||immediately|
|Machine condition|| |
Germany, 72108 Rottenburg-Ergenzingen |
Show on map
|for plasticizing any shredded plastic waste. Most recently shredded foil waste was processed. |
PVC, e.g. from cable waste, is also possible.
Drive motor 180KW
Throughput approx. 800-1000 kg per hour
The roller is heated by means of carrier oil
The squeegee roller heats and kneads the plastic waste continuously into a hot pulp, shredded material is continuously fed to the roller and particularly well heated and kneaded material on the back is formed into a sausage using a scraper. The heated plastic sausage goes through a guillotine into a dosage form
. Once the mass is reached, the sausage is sheared off by means of the guillotine, the dosage form unfolds, the plastic sausage is conveyed to the 1000 t presses by a conveyor belt, where parts are pressed out. Pallet planters etc
The use of smaller presses is also possible !!!!!
For example, different thicknesses of recycling panels were pressed on veneer presses, which were used in the dog sports equipment I produced.
Today's devices are made of aluminum. I also have to sell a veneer press for around 1000 euros.
Heating and electrical control is not included.
Only the star-delta connection of the motor is included
|Dimensions (l x w x h) approx.||4,600 x 1,800 x 2,400 mm|
|Weight approx.||10,000 kg|
|Delivery terms||FCA Rottenburg-Ergenzingen, loaded on truck|
|Cost Dismantling & Loading||500€ (binding)|
|Shipping costs||not included|
|Payment terms||100% payment prior to collection|